/* Copyright (c) 2017 FIRST. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted (subject to the limitations in the disclaimer below) provided that
 * the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this list
 * of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice, this
 * list of conditions and the following disclaimer in the documentation and/or
 * other materials provided with the distribution.
 *
 * Neither the name of FIRST nor the names of its contributors may be used to endorse or
 * promote products derived from this software without specific prior written permission.
 *
 * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
 * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

package org.firstinspires.ftc.teamcode;

        import com.qualcomm.robotcore.hardware.DcMotor;
        import com.qualcomm.robotcore.hardware.HardwareMap;
        import com.qualcomm.robotcore.hardware.Servo;
        import com.qualcomm.robotcore.hardware.configuration.typecontainers.ServoConfigurationType;
        import com.qualcomm.robotcore.util.ElapsedTime;

/**
 * This is NOT an opmode.
 *
 * This class can be used to define all the specific hardware for a single robot.
 * In this case that robot is a Pushbot.
 * See PushbotTeleopTank_Iterative and others classes starting with "Pushbot" for usage examples.
 *
 * This hardware class assumes the following device names have been configured on the robot:
 * Note:  All names are lower case and some have single spaces between words.
 *
 * Motor channel:  Left  drive motor:        "left_drive"
 * Motor channel:  Right drive motor:        "right_drive"
 * Motor channel:  Manipulator drive motor:  "left_arm"
 * Servo channel:  Servo to open left claw:  "left_hand"
 * Servo channel:  Servo to open right claw: "right_hand"
 */
// Based on HardwarePushbot
public class Hardware6417
{
    /* Public OpMode members. */
    public DcMotor  leftfrontDrive   = null;
    public DcMotor  rightfrontDrive  = null;
    public DcMotor  leftbackDrive   = null;
    public DcMotor  rightbackDrive  = null;
    public DcMotor  leftliftMotor    = null;
    public DcMotor  rightliftMotor   = null;
    public Servo    armServo    = null;
    public Servo    handServo   = null;
    public Servo    flipServo   = null;

    public static final double LIFT_UP_POWER = 0.5;
    public static final double LIFT_DOWN_POWER = -0.8;

    public static final double ARM_MIN =  0.0;
    public static final double HAND_MIN =  0.0;
    public static final double FLIP_MIN =  0.5;
    public static final double ARM_MAX = 1.2;
    public static final double HAND_MAX =  1.0;
    public static final double FLIP_MAX = 0.0;

    /* local OpMode members. */
    HardwareMap hwMap           =  null;
    private ElapsedTime period  = new ElapsedTime();

    /* Constructor */
    public Hardware6417(){
    }

    /* Initialize standard Hardware interfaces */
    public void init(HardwareMap ahwMap) {
        // Save reference to Hardware map
        hwMap = ahwMap;

        // Define and Initialize Motors
        leftfrontDrive  = hwMap.get(DcMotor.class, "left_front_drive");
        rightfrontDrive = hwMap.get(DcMotor.class, "right_front_drive");
        leftbackDrive  = hwMap.get(DcMotor.class, "left_back_drive");
        rightbackDrive = hwMap.get(DcMotor.class, "right_back_drive");
        leftliftMotor = hwMap.get(DcMotor.class, "left_lift_motor");
        rightliftMotor = hwMap.get(DcMotor.class, "right_lift_motor");
        leftfrontDrive.setDirection(DcMotor.Direction.FORWARD); // Set to REVERSE if using AndyMark motors
        rightfrontDrive.setDirection(DcMotor.Direction.REVERSE);// Set to FORWARD if using AndyMark motors
        leftbackDrive.setDirection(DcMotor.Direction.FORWARD); // Set to REVERSE if using AndyMark motors
        rightbackDrive.setDirection(DcMotor.Direction.REVERSE);// Set to FORWARD if using AndyMark motors
        leftliftMotor.setDirection(DcMotor.Direction.REVERSE); // Set to REVERSE if using AndyMark motors
        rightliftMotor.setDirection(DcMotor.Direction.FORWARD);// Set to FORWARD if using AndyMark motors

        // Set all motors to zero power
        leftfrontDrive.setPower(0);
        rightfrontDrive.setPower(0);
        leftbackDrive.setPower(0);
        rightbackDrive.setPower(0);
        leftliftMotor.setPower(0);
        rightliftMotor.setPower(0);

        // Set all motors to run without encoders.
        // May want to use RUN_USING_ENCODERS if encoders are installed.
        leftfrontDrive.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);
        rightfrontDrive.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);
        leftbackDrive.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);
        rightbackDrive.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);
        leftliftMotor.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);
        rightliftMotor.setMode(DcMotor.RunMode.RUN_WITHOUT_ENCODER);

        // Define and initialize ALL installed servos.
        armServo  = hwMap.get(Servo.class,"arm_servo");
        handServo  = hwMap.get(Servo.class,"hand_servo");
        flipServo = hwMap.get(Servo.class,"flip_servo");
        armServo.setPosition(ARM_MIN);
        handServo.setPosition(HAND_MAX);
        flipServo.setPosition(FLIP_MIN);
    }
}
